#1 – Most Sold Motion Simulator in The World

We sold more Motion Simulator platforms than all other vendors combined.

DOF Reality H3 Consumer Motion simulator platform

Features: Three dimensional movements (Pitch + Roll + Yaw/Rear traction). The H3 model is designed to move not only the seat, but, all simulator controls (steering wheel, joystick, pedals, throttles, etc.) mounted to the motion platform. When you move, everything moves!
Compatibility: PC, Xbox* and PlayStation*
Any Peripherals:  wheel , pedals, joystick , yoke, monitor , VR
Included: The motion platform. (The seat and game controllers are not included)

CharacteristicValue
Degrees of Freedom3 DOF (Pitch + Roll + Yaw/Rear Traction)
Full platform motionYes
Motions Range20 °
Speed50 cm/s (86 °/s)
Torque25 n/m
Acceleration0.7G T / 0.5G L
Power Consumption1300 Watt (peak)
Floor Foot print3×5, 2 ft H (100×150, 60 cm H)
Supported pilot weight330 lbs / 150 kg
Upgradableto H6

Seat Mover – the simplest model for motion simulator experience.

Features: This seat mover is the great motion simulator perfect for customers that want to enhance their gaming experience on their PlaySeat or GT Omega ART frame. This model moves the seat on two axis, Pitch and Roll (2 DOF).
For full-motion platforms, check out our H2,H3 or P2,P3 models.
Compatibility: PC, Xbox* and PlayStation**
Any Peripherals:  wheel , pedals, joystick , yoke, monitor , VR
Included: The seat mover motion adapter. (The seat and game controllers are not included)

CharacteristicValue
Degrees of Freedom2 DOF (Pitch + Roll)
Full platform motionNo
Motions Range16 °
Speed40 cm/s (66 °/s)
Torque22 n/m
Power Consumption700 Watt (peak)
Floor Foot print8×16.5×16.5" (21x42x42 cm)
Supported pilot weight154 lbs / 70 kg
UpgradableNo

This is same as MS2 motion simulator model, but based on more stronger and faster motors.

CharacteristicValue
Degrees of Freedom2 DOF (Pitch + Roll)
Full platform motionNo
Motions Range16 °
Speed50 cm/s (82 °/s)
Torque24 n/m
Power Consumption700 Watt (peak)
Floor Foot print8×16.5×16.5" (21x42x42 cm)
Supported pilot weight220 lbs / 100 kg
UpgradableYes, to any H models

motion simulator

DOF Reality H2 Consumer Motion simulator platform

Features: Two dimensional movements (Pitch + Roll). The H2 model is designed to move not only the seat, but, all simulator controls (steering wheel, joystick, pedals, throttles, etc.) mounted to the motion platform. When you move, everything moves!
Compatibility: PC, Xbox* and PlayStation*
Any Peripherals:  wheel , pedals, joystick , yoke, monitor , VR
Included: The motion platform. (The seat and game controllers are not included)

CharacteristicValue
Degrees of Freedom2 DOF (Pitch + Roll)
Full platform motionYes
Motions Range20 °
Speed50 cm/s (86 °/s)
Torque25 n/m
Acceleration0.7G T / 0.5G L
Power Consumption1000 Watt (peak)
Floor Foot print2×5, 2 ft H (59×150, 60 cm H)
Supported pilot weight330 lbs / 150 kg
Upgradableto H3, H6

motion simulator

DOF Reality H3 Consumer Motion simulator platform

Features: Three dimensional movements (Pitch + Roll + Yaw/Rear traction). The H3 model is designed to move not only the seat, but, all simulator controls (steering wheel, joystick, pedals, throttles, etc.) mounted to the motion platform. When you move, everything moves!
Compatibility: PC, Xbox* and PlayStation*
Any Peripherals:  wheel , pedals, joystick , yoke, monitor , VR
Included: The motion platform. (The seat and game controllers are not included)

CharacteristicValue
Degrees of Freedom3 DOF (Pitch + Roll + Yaw/Rear Traction)
Full platform motionYes
Motions Range20 °
Speed50 cm/s (86 °/s)
Torque25 n/m
Acceleration0.7G T / 0.5G L
Power Consumption1300 Watt (peak)
Floor Foot print3×5, 2 ft H (100×150, 60 cm H)
Supported pilot weight330 lbs / 150 kg
Upgradableto H6

DOF Reality H6 Consumer Motion simulator platform

Features: All possible six Degrees Of Freedom movements (forward, backward, surge, side to side, sway, up, down, heave, yaw, pitch, and roll). This unique platform is capable to reproduce any possible motion! There is no other product on the market under $15,000 that can do what our platform does. The H6 model has our unique SFU drive system that is designed to move not only the seat, but, all simulator controls (steering wheel, joystick, pedals, throttles, etc.) mounted to the motion platform. You will feel like you are really driving a car or in the cockpit of a plane. When you move, everything moves with you!
Compatibility: PC, Xbox* and PlayStation*
Any Peripherals:  wheel , pedals, joystick , yoke, monitor , VR
Included: The motion platform. (The seat and game controllers are not included)

CharacteristicValue
Degrees of Freedom6 DOF (Pitch, Roll, Yaw, Surge, Sway, Heave)
Full platform motionYes
Motions Range17 °
Speed50 cm/s (86 °/s)
Torque25 n/m
Acceleration0.5 G all directions
Power Consumption2200 Watt (peak)
Floor Foot print4×5, 2 ft H (120×150, 60 cm H)
Supported pilot weight330 lbs / 150 kg
Realism

Realism

Experience the g-force acceleration, braking and high turns that add incredible Motion Simulator immersion to your racing and flight experience.

Virtual Reality

Virtual Reality

For total immersion, our Motion Simulator platforms are VR compatible with Oculus Rift/Gear, HTC Vive and all future products.

Professional

Professional

The lightning fast reaction time of PID of 5-10 ms makes our Motion Simulators perfect for professional training.

Ergonomics

Ergonomics

Innovative and well thought-out design that ensures exceptional performance and quality in each Motion Simulator.

6 Axis - Degrees of Freedom

6 Axis - Degrees of Freedom

We offer 2 DOF (Pitch + Roll), 3 DOF (Pitch + Roll + Yaw), and Full 6 DOF Motion Simulator versions to reproduce automobiles, aircrafts, or any other vehicle motion.

Customizable

Customizable

Adjustable Motion Simulator mounts allow you to customize the platform to your needs.

Upgradeable

Upgradeable

We provide a modular structure that is engineered to be upgradeable to more Dimensions of Freedom (Axis).

Flying and Racing

Flying and Racing

The groundbreaking Motion Simulators are taking racing and flight simulation to a new level with flight Joysticks and HOTAS mounts.

Plug & Play

Plug & Play

Our Motion Simulators are tested and tuned with minimal assembly required and are ready to plug and play out of the box.

Models Comparison

M2H2H3H6
Degrees of Freedom
(Axis)
2 DOF2 DOF3 DOF6 DOF
Full platform motionNoYesYesYes
Motions Range16 °20 °20 °17 °
Speed66 °/s86°/s86 °/s86 °/s
Torque22 n/m25 n/m25 n/m25 n/m
Power (peak)700 W1000 W1300 W2200 W
Floor Foot print1x2x1 ft3x5x2 ft3x5x2 ft4x5x2 ft
Pilot weight240 lbs / 110 kg330 lbs / 150 kg330 lbs / 150 kg330 lbs / 150 kg
UpgradableYes, to any H modelsH3, H6H6
P2P3P6
Degrees of Freedom
(Axis)
2 DOF3 DOF6 DOF
Full platform motionYesYesYes
Motions Range24 °24 °25 °
Speed105 °/s105 °/s105 °/s
Torque28 n/m28 n/m28 n/m
Power (peak)1100 W1400 W2400 W
Floor Foot print3x5x2 ft3x5x2 ft4x5x2 ft
Pilot weight440 lbs / 200 kg440 lbs / 200 kg440 lbs / 200 kg
UpgradableP3, P6P6

Models Comparison

M2H2H3H6P2P3P6
Degrees of Freedom
(Axis)
2 DOF2 DOF3 DOF6 DOF2 DOF3 DOF6 DOF
Full platform motionNoYesYesYesYesYesYes
Motions Range16 °20 °20 °17 °24 °24 °25 °
Speed66 °/s86°/s86 °/s86 °/s105 °/s105 °/s105 °/s
Torque22 n/m25 n/m25 n/m25 n/m28 n/m28 n/m28 n/m
Power (peak)700 W1000 W1300 W2200 W1100 W1400 W2400 W
Floor Foot print8x16.5×16.5"3x5x2 ft3x5x2 ft4x5x2 ft3x5x2 ft3x5x2 ft4x5x2 ft
Pilot weight240 lbs / 110 kg330 lbs / 150 kg330 lbs / 150 kg330 lbs / 150 kg440 lbs / 200 kg440 lbs / 200 kg440 lbs / 200 kg
Platform weight33 lbs / 15 kg77 lbs / 35 kg120 lbs / 55 kg158 lbs / 72 kg81 lbs / 37 kg127 lbs / 58 kg171 lbs / 78 kg
UpgradableYes, to any H modelsH3, H6H6P3, P6P6
Price$1135$1722$2527$6552$2872$4137$8955

We incorporated industry leading electronics, encoders and motors in our products. The durability of the DOF Reality is extremely high for its price point, and the maintenance requirements are minimal.

Each unit we ship is built to our high standards, and goes through extensive quality assurance testing and tuning before being disassembled and packed for shipping. The assembly required is as easy as IKEA furniture and takes 30 min to 2 hours with all hardware and tools provided by us.

All our units come with a 1 year faulty part return to base warranty (excludes normal wear and tear).

We provide the most advanced and best value consumer platform in the world.

We are not afraid of competition. We don’t have any!

Our mission is to make universal plug and play motion simulator platform affordable for many gaming enthusiasts and professionals.

Testimonial:

Very happy with the packaging, excellent build quality and engineering and very good product at a good price. Keep up the great work guys!

Javed, Australia

Testimonial:

I have been interested for a long time in such a system, but
a DIY build was due to lack of time, tools and knowledge not an option for me.

After some days of intensive researches, I came across this product and got interested.

It is affordable and after reading further, it sounded good to me and I contacted DOF Reality.

The whole process took only four weeks from building to the delivery to me in Germany.
One week for the delivery itself, pretty fast.

## building process
steel frame together is very solid.

I have it attached with HE SimPedals.
The wheel is an OSW with small Mige, which is installed on a seperate frame.
I think, it is more like in real car, where you are forced to/from the wheel, too.

The motors have some space, of course.

The software setup with the provided presets is just easy.

Most interesting thing after all, when I have DOF turned off,
even with the FFB wheel, it feels like dead -)

With the great support (Igor to name him),
I would buy it again, no doubt.

pullmoll

Testimonial:

Let me give you my take on the DofReality P3 rig I purchased.
Iv’e been sim racing for a couple of years now and running a mixture of equipment, ECCI 7000 FFB, SimFai Solutions custom wheel, HPP PRX-SE pedals and a couple of Thrustmaster TH8A shifters, all mounted onto a Obutto R3volution rig and projecting onto a screen.
All was well in my sim racing universe until one afternoon when a friend and I was searching the net for ways to make our sim racing experience a little more immersive. We hit on the idea of having traction loss which would give us a little more feedback and improve our experience, and was initially looking at buying the SimXperience traction loss frame and mounting the Obutto onto that frame somehow. That’s when we came across the DofReality website. For a similar price for the SimXperience traction loss frame we could have a 3 DOF rig giving pitch & roll and the traction loss we were looking for.
After getting the green light from she who must be obeyed, and a number of questions to DofReality who responded to our questions very quickly, my friend and I ordered 2 of the DofReality P3 rigs. The P3 rig has more powerful motors with integrated step down gearboxes
Installing software provided by DofReality went without a hitch and actually getting the rig to move was really straightforward. The SimTools, were simple and easy to understand once you actually got your head round what was happening. DofReality provided links to all the software needed including all the plugins for chosen sims.
So, I’ve been using the rig for about two weeks now. I’ve got the rig to work with Assetto Corsa, Automobilista, iRacing, Dirt Rally and RFactor 2. I’ve yet to try Project Cars and R3E.
Now I’m dialing the motion in, I’m really happy with the rig. At first, I thought the DofReality Rig was just wrong and I had wasted my money, but now, yeah I’m glad I spent the cash. It really adds to the immersion. Purchase a DofReality rig and you are paying a lot less than the competition, and it’s not just a seat mover. Obviously the software used is known and understood however if you are new to motion simulators there is a fairly high level of education.
Sorry, it’s been a long-winded report but hopefully it will give the next person some insight into what to expect if they were to go down this route. The DofReality P3 rig is great value for money .

Andy, Malaysia

Testimonial:

We have just assembled the simulator and have to say the quality is outstanding.
You should be very proud of your product.
Kind Regards
Phil, UK

Testimonial:

Got mine in under a week. Just got everything assembled. I purchased the P3 with traction loss. The support and communication from them as been awesome. Highly recommend!! The time it would take to fab your own is not worth it.. The product is high quality and hand built.

Mxcobra

Testimonial:

Great Product!!

Colin, UK

Testimonial:

Rig is pretty well balanced. I’m really enjoying it!

Slaven, USA

Testimonial:

I got the package on Monday morning.

Thanks for all of your help in getting the payment and shipping taken care of.

The platform is great. I was building it, thinking that there was no way some of the parts would fit together. The fit was just too tight. But it did all fit together and I have to say, I know how hard it is to get quality control done well in factory settings. You guys did a very nice job with the manufacturing. The tolerances are extremely tight and the platform is super stable. Very nice work, sir.

I feel like you guys are doing a great job with customer service and the product design.

Thanks for everything.

Take care and I wish you great success in your efforts,

Geoff, USA

Testimonial:

Just want to let you know. Your product works wonderfully. It’s amazing product.
Thanks,
I’m a happy customer.

John, USA

Testimonial:

I purchased a h2 motion platform from you guys in October last year and it arrived in about 9 days. I was blown away with the thought you guys have put into your design and build.

Tracy, UK

Testimonial:

Thanks for the best customer service I’ve ever experienced…

William, USA

Testimonial:

Thank you DOF Reality for making an amazing simulator!

Madman

Testimonial:

My H2 arrived yesterday  at noon local time and looked in good shape..
WOW, six days from the Ukraine to my house in the GA USA area.
Thanks
James, USA

Testimonial:

I’m a fan of your platform. It’s great value and well built. Shipping leaves a little to be desired.

Phil, UK

Testimonial:

I got to be a big fan of your products in the last days.

 

Stephan, Germany

Testimonial:

Got the sim up and running and loving it.

Juho, Finland

Testimonial:

One year ago (i see now ?) i ordered a dof reality p3 system. I’m Verry happy with it! It works like a boss! I mainly play racing games and have the most series working together with my fanatec gear and wind simulation. It’s a verry good experiance. Thanks for that!

Pascal, Holland

Testimonial:

Your chair is amazing !

A few other fellow DCS members are going to purchase your 2DOF, also i have a demo arranged with a local Air museum. who are interested on purchasing a few as well.

James, UK

Testimonial:

The H3 sure is fun. We have been using it for driving and racing for now, but we have experimented with flight and it is great for flight too.

Gonff, USA

Testimonial:

Much thanks, the P3 platform works splendidly !

Chris, USA

Testimonial:

First I want to say thank you for an amazing product! I just finished assembling it and tried it out today! You guys do an amazing job packing all of the parts! I’ve never seen so much tape styrofoam and bubble wrap, but it was well worth it as every part was received as if new!

I assembled it and the finished product! Enjoy! I did a few laps at Mugello with Assetto Corsa in a McLaren 570s and had a blast! Gotta try the Nurburgring in a Ferrari S70H next!!

Rex, US

Testimonial:

Thank you. Superior customer service!

Toni, Finland

Testimonial:

I have had this chair for a month and so far I LOVE IT, it’s a solid well-built platform which can withstand my 17 stone weight with ease!!!! It can handle upto 150kg

THE FRAME
Well its a metal frame platform frame with decent stability, the design has been thought out and upgraded to give the best balance and stability.

THE MOTORS & POTENTIOMETERS
A solid pair of of motion platform motors and decent Potentiometers that seem really solid.

THE ELECTRICAL PART
So this seems to use a couple of Monster boards and an andrino for the control of the platform, the power comes from two linked power units.

The box has good ventilation at the top with two grills and the rear of the box has two fans.
As a note, the packaging was exceptional.

The connectors – There are 4, 2 per motor and you can’t get this wrong as they are colour coded, the connectors are strong and I cannot see these getting broken anytime soon. So, kudos for these.

HOW EASY WAS IT TO BUILD
Well I’m not a fan of flat pack furniture but like most I always manage to get the job done, This build took me about 3 hours.

The bolts provided are quality and 3 weeks after the build, they haven’t budged, so a thumbs up from me ??

DELIVERY

After placing my order the platform was built and shipped within 2 weeks, I believe they build to order rather than carry stock, and this makes sense.

HOW IS IT IN DCS
being as this is the only platform I have ever used, for me it is truly amazing, even tho the platform moves 20-30 degrees. Trust me its more than enough. The emersion is amazing…

I have my sensors mounted in the corner of the room, not on the platform itself, some have argued this could affect the vr motion. In response, you may be right but I always tilt my head with the horizon and as such I haven’t noticed the sensor motion.

I’m sure some will prefer to mount the sensor on the chair, and you can but I use the rift for other games so that really isn’t an option for me.

Slow movements are always in line with the motion and the high turns left then right again.

Its cheap compared to other platforms
It well built
Its flexible (fight or racing games)
Its compact
the motors and running is quiet.

So would I recommend this ??
HELL YES in VR it gives a level of emersion which is a must have. Even tho the movement is slight, its still enough to trick the brain and bring back motion sickness all over again – that’s right- its like staring in VR for the first time, all over again ??.

I can’t recommend this highly enough. For the price, this is by far the BEST there is.

James, UK

Testimonial:

I have the 3dof version and the htc vive, and the experience is great.
IMHO the acceleration and braking depends on several factors, the total weight you put to the rig (ie wheel base, gear box, your weight, extra accesories), game feedback, the car you are driving, simtools setup, etc. When everything its setup correctly, it will not push you with enough force to put your face into the steering wheel, but you will feel that you are braking. I saw some pics from other guys that use safety belts with this rig but I think it is totally unnecesary.
For me VR is a must have with this rig.
I hope this helps you to decide.

Andres, USA

Testimonial:

I would like to compliment you on what an amazing product this is.  You exceeded my expectations from when I placed my order, till it arrived at my front door.  This is an extremely well built quality piece of equipment that I am proud to own. Thank you for your support and a great product!

Robert, USA

Testimonial:

I have recently bought one of these kits and have had the chance to try it with a number of different games.

Assembly went well and only took a few hours. I found the included instructions to be very simple and straightforward, this made the assembly process very simple and easy.

I had the chance to test out the kit with Dirt 3, Dirt rally, iRacing, some of the Need For Speed games, and a few different flight Sims. I was actually very impressed with how strong the platform is and the strenght of the two motors it uses. I weigh about 230lbs and the sim had no problem throwing me around as I drove around within the various games. I’m currently using a Logitech G27 as my steering wheel, and the included wheel stand is very sturdy and has very little flex, even with a monitor attached to it.

Overall I was impressed with the kit, and would recommend it for anyone thinking of buying it.

Kbman59

Testimonial:

thank you!
unbelievable fast response!  My friend runs a you tube channel, he is going to put this on his channel.  I will give you guys an AWESOME review.  you have been better then I expected!!
Thank you,
Andrew, USA

Testimonial:

I have my DOF Reality seat mover M2 up and running. It is a good piece of hardware that provides a lot of seat movement. My challenge now is to find software settings that provide movements that best compliment running iRacing, the only sim I use. Anyone considering a seat mover should strongly consider the M2. Priced at $999 USD, shipped, the M2 costs much less than NL. For years I wanted a V3, but just didn’t think paying $3,000 was worth it. Even the used ones I thought about buying were over $2,400. So, when I stumbled upon the M2 in the iRacing forums and then did some research about DOF Reality, I decided to give the M2 a try. I’m glad I did.

Anyone considering the M2, should also take a hard look at getting one of DOF Reality’s full motion rigs. I could have gotten their full motion H2 for $1,534 USD shipped. I had space considerations and did not want to have to buy new triple monitor stands, so I opted instead for the M2. In hindsight, I’m not sure that was the right move. There is always some buyer’s remorse with type purchases.

Ordering

The ordering process was very smooth. When I placed the order, DOF Reality emailed me that it would take about three weeks for it to be produced and delivered, and that is exactly how long it took.

September 3: M2 ordered
September 13: M2 shipped from Zaporizhia, Ukraine via TNT.
September 21: M2 delivered to me in Columbia, SC, USA via FedX (delivery was attempted the day before, but since no one was home, they left a door tag, which I signed and left on the door for delivery the next day)

There were no import issues or costs. It showed up at my door just like I had ordered it from a US retailer.

Packaging

The M2 and its controller came in one box with the contents encased in Styrofoam. It was very well packaged and was delivered with no damage to the box. Some of the Styrofoam was brittle, so keep a vacuum cleaner nearby when removing the contents (or better yet, do it in the garage).

Tale of the Tape

The M2 weighs about 19 pounds. The connecting cables are 4.5 feet long.
The control box is made of metal and is well constructed, but a little on the large size: 12” wide, 10.5” deep, 5.25” high, and weighs about 7 pounds.

Mounting Seat

I had a seat from an old rSeat RS EVO V3 that I needed to mount to the M2.
In order to position your seat in the best center of gravity position on the M2, you will need to have it mounted on seat slider rails, which fortunately I had.

Attaching M2 to Rig

DOF Reality has mounting options for the M2 for various cockpits, like the Playseat. I selected the floor mount version because of how low it sits so that I could keep my seat as low as possible. I ended up about 2 inches higher than my seat was previously. I’m finding that I like the angle of hitting my brake pedal better in the higher position, which has been an unexpected benefit of the higher seating position.

Connecting to Computer

DOF Reality makes it real easy to get the M2 up and running. They provide a good set of instructions and a software package that installs the driver and SimTools software and game plugins. It took minutes for me to have the M2 moving around.

Nimzovich, USA

Testimonial:

I purchases a DOF H3 a while back and I’m loving it.

Thomas

Testimonial:

Heyo!

So I’ve been playing with my H2 for a week or so now and love it!

Eli, Alaska, USA

Testimonial:

I purchased the DOF Reality H3 Motion platform because I was looking for a motion simulator that I could use for flight simulation and car racing simulation. I didn’t have the DIY skills to build my own, and a lot of the commercial products were way too expensive for my budget. When I came across DOF Reality I dropped them an email and from the very start they were incredibly responsive and helpful. I purchased one right away and awaited delivery. Delivery was fast, the motion platform functions perfectly and the included sim tools software was easy to setup. In addition to this DOF Realitys on going customer support after purchasing was brilliant and they always kept me up to date with the process and answered all my questions.

I highly reccomend DOF Reality products.

Thomas, UK

Testimonial:

The H3 is doing very well for me, the motion experience with them is simply amazing.

Sincerely,

Adam, USA

Testimonial:

I liked your customer service. The product of good quality. I have done some alternations to it so i Can accommodate both sport car seating position and F1 position….
Wish tou good luck

Jakub, Ireland

Testimonial:

I received the M2 seat mover and it’s been a blast. Everything lined up perfectly and I was able to set it up in less than an hour. I’ve been able to dial in the settings very nicely.

Thanks for your support. I’ve really been impressed by the quality of the kit. I hope this venture is an outstanding success for you and your company.

Brian, USA

Testimonial:

Thank you for your excellent service and communication throughout the purchase of the P3 rig.
I have it assembled and it only took a couple of hours.
I am in the process of designing a new top section to the rig and i have no issue doing this as the base of this system is great and i do not have to do anything with this.

Gary, UK

Testimonial:

Hi everybody,

I’m happy to join this great community with all your experience around motion sim. I had my HTC Vive for some time till I realized how much more fun it makes to do racing sims in VR. Then I read about the possibilty to use motion rig systems to increase the immersion and reduce motions sickness (it really helped in my case). So I spent some nights reading through this forum and all the different topics that can and need to be considered. I studied systems engineering some years ago so I have some background for electronics, mechanics and software.

Finally due to time and space limitations I decided to get a DOF Reality as it was easier than to gather all the parts and I really love it. As expected you can spend hours in optimizing and tweaking but man what have I missed back in the times where there was no VR or motion in racing sims…. I plan to add vibe functionality later on and we will see what the future brings. Those builds you have there are just unbelievable.

Jens, Switzerland

Testimonial:

Hi!

First off I want to tell you that I’m very happy with the product, it delivers feedback about what I was expecting and even more.  Im happy anyways 🙂

The best,

 

Anders, Estonia

Testimonial:

Your products are very satisfying to me,
and your after-sales service is great.

Ruyin, Taiwan

Testimonial:

I was very pleasantly surprised by the quality of workmanship.
I had the idea that DOF was kind of a garage operation, but the box and contents were very well designed and assembled.
I’ve been inside boxes from all of the big players, and DOF was as good as any and better than most.

Mousetrap

Testimonial:

I’m practicing Calabogie Motorsports Park for an upcoming race there as I’ve never been there.  Really loving having the full motion sim for that!  Many of the participants for this race will also have never have been there, so practicing on the sim will really give me a leg up on my competitors.

Regards,

Scott, USA

Testimonial:

This product is a nice opportunity to try pre-built motion, and stay with it in case you love it (like me). Besides, there are not so many commercial full-frame movers (in fact I can’t recall any) with such compact design (I don’t have a free space for such monsters like simxperience setup). The various options give plenty of room for truly custom built rig, in my case I was also amazed by its adjustability (had to replace wide seat with narrow sparco rev). Anyway, I was totally sold, now I have motions look alike I was experiencing

hazardic

Testimonial:

I see that you guys post your customers setups on your website and now your Instagram page. I am sending you these pictures of my setup in which I used your P3 motion frame so that you may show off another example of your wonderful work to potential customers, whom may be looking into buying a frame from you guys and would like to see different setups to see if it will work for them as well. I am very satisfied with my purchase and would like to like share this with your company.

Michael, Bulgaria

Testimonial:

It runs perfectly, the product is amazing, sir. Well done. Oh, and you were correct about the pedal plate being very strong. I mounted the HPP pedals, which take a lot of pressure to apply the brake, and the chassis is completely stable. No issues at all. I’m very pleased and recommending the product to friends.

Geoff, USA

Testimonial:

I’ve been so captivated flying FS2 with Oculus Rift that 2 months ago, in pursuit of even more of a sense of realism, I purchased a motion platform. In fact FS2 has prompted so much interest in motion platforms on this and the IPACS forum that other simmers with many more flying hours than me have commented that they’ve never seen so much discussion on the subject. I think this reflects the addictive immersive quality of VR flight sim when powered by such convincing software.
Having fun now!
I have over the last two days had some very enjoyable flights which have given me a convincing sensation of being in an airborne object. Cranking up the side wind is much more fun now and after pulling off a short field landing yesterday with a strong cross-wind I was just buzzing. There was a strong sense of wrestling with the wind and the combination of feeling the roll and yaw as I made corrections to line up with the airfield gave a convincing feeling of the lightness and physicality of the aircraft (C172).
One of my favourite parts of a flight now is touchdown. There really should be a penalty for a clumsy heavy landing and by tuning the platform right you can get that physical feedback. The trick is to carefully map the heave DOF to pitch movement on the platform so that as you touch down you get a sudden short movement of the seat pitching back which lifts the seat and so feels like a thump in the back side – in proportion to how heavily you land.
Personally I’m very glad I went for the 3DOF platform with yaw as opposed to 2DOF. Incidentally DOFReality.com do sell the yaw as an add-on to the basic 2DOF platform.
So where does this leave me now? Having a lot of fun and very happy with my purchase decision, but I must confess to being hooked and wanting more.

Spit40, UK

Testimonial:

The P3 rig is working really great with PUMA !!! I have it set up for a helicopter sim in Aerofly FS2 but also works great with the fighter jets as well.
Andy, USA

Testimonial:

Greetings!

I wanted to write and thank anyone and everyone who is a part of your team, from your designers, to your fabricators, to your software engineers to your testers, to your support staff You have a great product and the support to back it.

It has taken me a while to really get a handle on the project that I’ve gotten myself into. With your support staffs help, and the people at SimeTools, I have a functional setup. I am currently at the beginning stages of fine tuning the simulator and its motions, and I can already see the robustness of your setup. I am very excited to continue the journey.

Thanks again,

John, USA

Testimonial:

We have DOF Reality P3 motion simulators in our arcade / VR game center and we are pretty happy with them. Once assembled and set up they are reliable and deliver a good experience.
We have had no issues so far regarding the durability and performance.
I have to add that a lot of the experience is the game itself – and there are only very few with commercial licenses.
We found Dirt Rally to be a really good game.

Still there are other games and we use a few that work pretty well.

As i personally suffer from motion sickness a LOT – I can tell that it is reduced by the chair – still I do get dizzy after a while – but it is a lot better than without the chair. In this case I cannot stand the games longer than 2-3 minutes. While with the DOF Reality P3 motion simulator I feel well after 15 Minutes. Maybe other people will experience it differently – but that is my personal feeling about it.

I would recommend to somehow mount the chair to the floor – otherwise it will start moving a bit on heavy movement. The noise produced by the fans and moving parts is acceptable and will normally not be heard by the player. If you mirror the sound of the game to speakers for the spectators – they will normally also not hear the seat moving or the fans.

Greetings from Berlin

Fabian, Germany

Testimonial:

I have just built the H3 platform and the quality is fantastic and instructions were great.

Jason, UK

Testimonial:

Your service support is ridiculously fast!, just so you know, and I really appreciate it 🙂

Björn, Iceland

Testimonial:

Wow!!!
Voila, en 45 secondes j’ai eu la meilleure experience de simulation de conduite, chez moi. Apres avoir teste l’Oculus Rift, je me suis dit qu’il serait tres dur pour moi de rejouer a un jeu de course sans la VR. Apres avoir teste le simulateur, plus jamais je ne jouerai a un jeu de course de type simulation sans.

So in 45 seconds I had the best driving simulation experience at home. After testing the Oculus Rift, I thought it would be very hard for me to replay a racing game without the RV. After testing the simulator, I will never play a racing simulation game without.

Benjamin, France

Testimonial:

Mounting solution for flight sims close to being finished but even in it’s current state, an absolute blast!

Jacob, Australia

Testimonial:

Everything is working beautifully with the P3. The motion is fantastic. I’m exceptionally pleased with the performance.

Greg, US

Thank you for all your help, my rig is working properly !

Once again your support team has been quick to respond with excellent information! I am really enjoying your product and your support is top notch!

John, USA

Testimonial Review

I just built a DOFReality H3 yesterday and having never built anything more than pieces of gym equipment, it was still surprisingly easy to put together. The build is actually quite solid and possibly one of the best things about it is that it only has a 2’x3’ footprint!! The simtools presets need a little tweaking but not much. The ‘yaw’ or traction loss mechanism is absolutely outstanding! I drifted a P1 GTR in Assetto Cross around the last few turns at Spa Francorchamps and the slide was epic!! DOF Reality Customer Support is very responsive to any of questions you ask of him and though it does take awhile to ship , it was totally worth it. I posted pictures of building the rig here: https://damage1913.blogspot.com/2017/11/dof-reality-h3.html?m=1

RacerGq

Testimonial:

I couldn’t be happier with my purchase. Thank you

John, USA

Testimonial:

I bought a 3DOF 2 month ago. Buying, money transfer and delivery went well. Took about a month overall with building, delivery and picking up with customs (they haven’t found the provided clearance papers…, but totally customs fault.
Two packages, about 30 and 18 kilo respectively. Quality is good, looks (and feels)  sturdy enough. bolts and screws are provided in labeled packages. I had some small parts were paint coating was breaking off, but those are in (later) min visible parts.
Buildup was done in about 3 hours. All tools were provided (in better quality than Ikea, thumbs up), keeping another wrench nearby is recommended though. Looking at photos on the page and videos helped a lot though. You shouldn’t expect Lego level instructions.
Software installation was a pretty ok. install some three programms, although some steps were unclear in the software. Solved them after emailing about clarifying some instructions. Skimming the forums helped as well. I am using it (solely atm) with PCars2. Fine tuning took a long time though and is an ongoing process.
Using the thing is awesome. In connection with VR its the closest I came to regulary drive a 911 GT3 RS on a track. Sensation for breaking/accelerating are really good and differ a lot for different cars. Flooring the paddle in a GT86 is ok, in aformentioned 911 stunning and outright frightening in an F1 car. I dont feel any lag between driving and seat reaction.
Same goes for sideway movement, could use some more “power” there, but I guess nothing will simulate 4g in an F1 high speed corner… Feeling is good nevertheless.
Yaw movement is brilliant, both in controlled (drift) and uncontrolled (spin) conditions.
“Downsides” are: I don’t go as reckless or as far over to the limit  as without the seat. Impacting a wall does not feel good. And now I know, why Nordschleifes Compression is called exactly that.
After all: would buy again and thanks to the guys of dofreality.
Hannes, Germany

Testimonial:

I would just like to thank you for the amazing responds and even more your product.

That is just fantastic!!

All the assembly went really good and the fitting on the parts is super!

I am really happy and if there is anything i can do for you to make your simrig reach out to a lot more customers here in Scandinavia just let me know and i will do everything a can!!
I wish you all the success you can have because now i know that you are worth it !!
Otto, Sweden

Testimonial:

Since receiving the simulator, putting it all together and loading up the software everything is working as expected.

Thanks again for a solid rig!!!!

Steve, USA

Testimonial:

Thanks a lot ! 🙂
My Brother Thorsten and I we are so happy about your motion SIM. In the past my Brother and I try to build our own, but we lost in confusion, because it was to much for us.
Ok have a nice day, Greetings from us from Germany
Yours
Thorsten

Ingo, Germany

Testimonial:

I’m feeling a lot happier now. I’m using it for flightsim so can’t comment on how well it copes for driving.

On the plus side I was lucky and had no import duty to pay.

Anyway I’m happier now as the DOF Reality guys paid for me to return my motors and they came back working much more smoothly. No charge all round and fortunately no import duty again.

What I still really like is the compact and sturdy design. Mine arrived well finished with just the odd scuff mark, probably due to heavy metal parts rubbing together during shipping. I appreciate good engineering and I like this platform.

Spit40, UK

Testimonial:

This chair assembly is pretty remarkable. I use it primarily for flight simulators and for Elite Dangerous with the Oculus Rift. It adds enough to the realism that I’ve caught myself blowing through most of a Saturday just flying around. I did have one hardware issue early on, but your team was very helpful and responsive with the debug effort and sending the replacement part. I’ve been thoroughly delighted and satisfied.

 

Scott, USA

Testimonial:

Hey ,

I’ve had the H3 for about a year now and I love it!

THANKS!! 🙂

Jason, USA

Review:

For those of you interested in purchasing the dof reality rig let me just tell you it is definitely worth every penny I spent. I have the P3 model with traction loss. I knew I would be adding extra weight to it so I decided on the upgraded Motors.

It arrives within two weeks of ordering it, which is pretty much across the world. The thing is super easy to assemble, and even came with all of the tools including real wrenches. The best part is it comes pre setup with detailed instructions for Sim tools and plug-ins for virtually every game I can think of except wreckfest. I’ve watched a lot of videos trying to teach you the stuff and to be honest I’m happy it was included and I didn’t have to worry about it. This stuff is after all experimental and can be quite frustrating to figure out. The point of a motion simulator that you spend this much money on is to use it, not be fiddling with settings and never able to use it.

Before I go any further I will say the only other motion simulator I considered was the prosimu t1000. It is considerably more expensive especially if you plan to go 5 dof. The motor seems extremely noisy and the articulation seemed to be much less. for a brief second I consider the NL motion platform platform but it’s just a seat mover and I’m not interested in that. The original motion platform I have always wanted was the simxperience Stage 5. I drooled over it for years. But in the end it’s way too expensive and way too large and basically just a seat mover with traction loss. And their software can be really wonky because it is proprietary.

As for the rig itself it’s very well made. You would think it’s a commercially made item not some DIY project made in a basement.

And as for using it all I can say is it has changed my sim life! Every time someone comes over and I put them in X-Plane VR or project cars 2 with triple screens people literally say it’s the coolest thing theyve ever seen. The level of immersion is unreal. The few games I play on occasion that are not supported by motion seem lifeless.

If you’re seriously considering purchasing this, My only recommendation would be to save up a little more money and get the traction loss. It is just so worth it! Feeling the car slide out from under you is like nothing you’ve ever experienced. I’m pretty sure they make this as an add-on kit if the budget is super tight.

1 minute teaser video: https://www.youtube.com/watch?v=OvbkeBSIvO8

John, USA

Testimonial:

First all, thank you for the attention and support.
Your  product  is really good and exceed my expectations.
Marcelo, USA

Testimonial:

Hi
I did purchased a p3 machine from you and i’m really loving it thanks for that..

Patrik , Australia

Testimonial:

The machine is amazing … It’s a great Experience with Oculus!

Felipe, Chile

Testimonial:

DiRT Rally with the dof reality v3 motion platform and oculus vr. WOW! This is great!

Stepn

Testimonial:

I got my DOF P3 about a month ago. I’m so happy and the money I saved not buying CXC, etc… made me decided to setup 2 so I can race with friends in the same room.

Here they are

one with vive pro (much nicer vr but the software is not as robust as rift)
one with oculus rift and in case seasick 3 24″ benqs

I think DOF Reality has the best value and its quality is just as high as the high end units. The motors design is much faster than actuator, nice job.

Technical support from DOF is really good too. They know everything about how to fix these and even the popular games issues.

A+

Edmond, USA

Testimonial:

I would also like to Thank you  and your team for your full support. I am impressed with your help , service and quick responses to the damaged items being replaced and answering my questions. I will do a review on the facebook sim pages and it will be a good one.
Much appreciated for your efforts.
Best Regards
Chris, UK

Testimonial:

I train people on sim and track. My son went from a sim into his first drift competition at 15 and ended in 7th place out of 23 cars in his first outing in a 200hp car.
Now with IDC and European drift series where Alan Hynes compete also a e drifter from Prodrift everyone wants to do drift simulation and i do a fair amount of setups in my private time.
I am very impressed with your unit . The unit is cost effective and works really well and can be fine tuned.
One of your units is used by the pilot competing in karting worldwide.

Kind Regards

Paul, South Africa

Testimonial:

Got my P3 delivery

The quality is amazing!

Rahel, Sweden

I’m writing this letter mainly because I wanted to let you all know how my experience has been so far with DOF Reality and what I think of your products.  I
have been researching the motion simulators for a while and have been working on designing a frame constructed out of steel.  The more I began researching frame designs the more complex things were becoming on my end.  At this phase I haven’t even began researching the motors or anything else that’s required for a full motion sim.

This is where DOF Reality comes in.  While searching around I came across a video that was reviewing your product.  When I saw the initial setup,  which I believe was a 3DOF system,  I began by opening up a communications channel via email with you.  I had many questions and I took a shot in the dark by asking them and to my surprise, my email was answered within minutes of me sending it!  We went back and forth on the emails and then I decided to take the plunge by ordering my 3DOF system from you all.

As soon as the order shipped I received an email from you stating the tracking number, documentation to read up etc.  Five days later I received my two packages.  I was thoroughly impressed with the packaging of both boxes.  Every item was bubble wrapped and nicely fitted together.  Instructions were well documented, the suggested videos to watch were also extremely helpful.  I finished assembling the frame in a little over an hour as I was just taking my time.

Once full assembled I was “wowed” on the quality of the product.  The frame design is quite impressive all the way up to the powder coated finish!  Again, I had a couple of questions so I emailed support and again my emails were answered within minutes.

I’ve been in the ISP (Internet Service Provider) business for 24 years and back in the day we used to have service like this from companies.  Today it is a rarity to have a company provide excellent technical support along with an excellent product!  When we needed to contact a vendor of ours for support we generally figured out the problem ourselves because the amount of time it took for them to answer was not acceptable.  I have nothing but positive things to say about DOF Reality.  DOF Reality has restored my faith that companies still exist that have superior services and products!  Thank you!

My score card:

Pre Sales questions: A+
Ordering process: Could not be any clearer or easier
Support: A+
Packaging and shipping times: A+
Assembly/Instructions: A+
Post Sales Support: A+ (this is where 99% of companies go wrong after the sale was made)
Product Quality: A+

I finally have everything tweaked for the game I’m playing and I must say I am truly amazed with this experience!  I will be ordering my upgrade kit soon to make it a full 6DOF system!

I cannot thank you all enough for making this process easy for me!  I have a very strong technical background along with good troubleshooting skills and I was becoming a bit overwhelmed trying to do this from the ground up by myself.  The time alone I saved by purchasing from DOF Reality was well worth the price of the system I purchased!

Thank you so much.

Warmest Regards,

 

Troy, USA

Testimonial:

The rig has been working great, it’s an absolute blast driving in it.
Mattias, Sweden

Testimonial:

I received my DOF Reality Motion simulator M2P – PlaySeat seat mover a few weeks weeks back and I must say it works brilliantly and your setup details in your email are excellent, it really improves my experience in Project cars VR.

Dan, Ireland

Testimonial:

Thank you,I left you guy 5 Star Feedback,It,s A game Changer…
And Thank you for the updated plugin download..It has Red Rover plugin in it,which the last plugin didn’t,I only play in VR,so games are limited to me..Once again this Is awesome..

Kevin, USA

Testimonial:

Once again thanks for a great product that is very competitively priced and built solid all other motion sims on market are priced out of range. Very fast customer help aswell

Keith, USA

Testimonial:

For anyone considering this, buy it!! I built my own motion simulator 2 years ago with a ton of help from the awesome users . I still made some mistakes and ended up with a heavy but under-powered rig with a little too much play in the levers. I was preparing to build version 2 when I came across DOF Reality’s very economical kit. I bought the Pro kit  shipped to US.

I sent payment and had 2 large boxes arrive less than 10 days later. I’ve built a lot of DIY and scratch built items but wow – this kit exceeded my expectations in terms of ease! If you can assemble IKEA furniture, you can assemble this kit. I had the complete kit built in less than 2 hours (minus controller, seat, and bass shaker mounting). DOF Reality includes the only tools you need – 1 crescent wrench and 3 hex wrenches. All of the bolts and nuts are in labeled packages. For what it’s worth, I could tell DOF Reality had fully assembled the rig before tearing down and shipping out. This meant everything actually fit 😉

The kit came pre-drilled with plenty of mounting points but still needed to drill new holes to accommodate every thing specific to my needs. Additionally.

Judging by the various pics above and on the web, it appears DOF Reality is refining the build so your version may be slightly different.

Keep in mind, you’re getting a rig for about half the price of its nearest competitor (in the US anyway) and it works with Simtools out of the box.

But does it work? I’m happy to say YES – it works very well even with my 195lbs/88kg and 80lbs/36kg of gear.

fusednova, USA

Testimonial:

I received mine today in 2 packages. Allot of attention was given to wrapping all the parts to minimise damage. All the parts were individually wrapped in bubble wrap and all were in perfect condition.

The fixings are all in individual packets, labelled for each section of the build. A full set of allen keys and spanners are also provided, which is very helpful. I followed the instructions provided by DOFReality via an emailed link. They were fairly easy to follow.

All the metal frame parts are well made and substantial.

Neal, UK